background image

– 9 –

Lower the switch to turn on the power. 

(The boiling lamp lights up and boiling 

starts.)

When water has boiled, the power automatically turns off and the boiling lamp goes off.

To turn off the power midway, raise the switch or remove the appliance from the power 

base.

ON

Click!

Do not open the lid while boiling.

Hot water may spurt out and cause 

scalding (or burns) or injury.

Do not place your face or hand 

near the steam vent while boiling. 

Doing so may cause scalding (or 

burns).

Do not leave the appliance 

unattended while boiling. 

If someone touches the appliance 

without realizing that it is in use, they 

may scald themselves.

Pouring hot water.

Do not over-tilt the appliance while 

pouring.

Hot water may leak out of the steam 

vent, causing scalding (or burns).

After use, unplug and empty the 

appliance.

Failure to do so may cause discoloring and 

corrosion inside the appliance.

 

Precautions for use

Do not over-tilt the appliance.

Doing so may cause scalding (or burns) due 

to hot water leaking out of the switch area 

or steam vent.

Condensation may appear around the 

switch area. This is not a defect. The 

appliance will automatically turn off 

when it detects steam from the switch 

area.

Summary of Contents for K02H Series













Reviews: