9
BAE PD-VS-014-05
2
Safety
Intended use
The Balluff SmartVision Controller is an inspection system for creating inspection applications for different industrial ar-
eas. The insepction system provides a user interface for connecting the camera via your web browser over network. Fur-
thermore you create and configure inspection programs with the user interface software "BVS Cockpit". You can monitor
and analyze the results of the inspection program.
The user interface is kept simple and understandable in order to enable a fast learning process and to allow intuitive
working. You will find more details in the "
BVS Cockpit Manual
".
The intended use also includes that you have read these operating instructions in their entirety and follow all the infor-
mation
– particularly the section “Safety”.
General safety notes
WARNING
Manufacturer's guarantee, warranty and liability are void for damage caused by unauthor-
ized tampering or unapproved use, installation or handling in violation of the specifications
of this user's guide. The operator must ensure that appropriate safety and accident preven-
tion regulations are observed
When connecting the Balluff SmartVision Controller to an external controller, observe proper
selection and polarity of the connection as well as the power supply (see “Connections and
contr
ol elements”).
2.2.1
General safety information
1. Please ensure secure standing when installing the Balluff SmartVision Controllers.
2. Please always let the inner components cool down before touching them to avoid physical injury or property dam-
age.
3. Ensure that the Balluff SmartVision Controller is supported correctly or fixed upright before you install new accesso-
ries.
4. Ensure that no loose objects remain in the enclosure after maintenance work.
5. Set-up of the Balluff SmartVision Controller and maintenance work may only be carried out by trained persons.
6. The Balluff SmartVision Controller is fitted with one replaceable battery. There is a risk of explosion when replacing
the battery improperly. Only replace the batteries with the type recommended by the manufacturer or with an equiva-
lent. Used batteries have to be disposed of according to manufacturer’s directions.
2.2.2
Electrical safety notes
1. Prior to connecting the device to the power supply, check if it complies to the values stated on the equipment.
2. This device is designed for electricity from an earthed plug socket. The mains plug with earthing device is an im-
portant safety feature. Do not switch off the earth to ensure protection against electric shock or property damage.
3. This system can be connected to an IT power supply. In any case, ensure that your Balluff SmartVision Controller is
also connected to the mass.
4. Please consider the positions of the power on/off button of the device and the safety switch for the room to ensure
fast switch off in case of an emergency.
5. Ensure that the device is always disconnected fully from the power supply before opening the enclosure.
Summary of Contents for SmartVision BAE PD-VS-014-05
Page 1: ...BAE PD VS 014 05 SmartVision Controller...
Page 2: ......
