Balluff ProfiNet BIS U-6028-048-104-06-ST28, User Manual

Page: 55 / 132

www.balluff.com 11 english
4
Installation
4.1 Processor unit installation
Fig. 4-1:
59,8
298 312
88
M5
20 54 20
107,6
M5
Installation
CAUTION
Danger due to ultra high-frequency electromagnetic
waves
The antennas of the identification system BIS U transmit
ultra-high frequency electromagnetic waves.
►
The installation position of the processor unit and
antennas must guarantee a safety distance between
the antennas and the workplaces of personnel. For
safety distances, see chapter
Safety on page 6.
The read/write distance can typically be as great as 6 m
depending on the ambient conditions and installed system
components. See the “Basic UHF manual” for more
information on minimum/maximum distances.
1.
Select a suitable installation position.
2.
Secure the processor unit using four M5 screws
(strength category 8.8, lightly oiled, tightening torque M
= 5.2 Nm).
Note
Optional mounting plates are available for
installing the processor unit (see Accessories on
page 41).
4.2 Interface information / wiring diagrams
Make the ground connection either directly or
using an RC combination to ground.
BIS U-6028
4 3 2 1
9 8 7 6 5
1
2
3
4
5
6
7
8
9
Antenna port 1
Antenna port 2
Antenna port 3
Antenna port 4
FE Functional ground
X1 – Power supply
X2 – PROFINET port 2
X3 – PROFINET port 1
X4 – Service interface RS232
Fig. 4-2: Electric connection of the BIS U-6028-…-ST28
Not all antenna ports 1…4 have to be
connected.
X1 – Power supply
Pin Function
1 0 V
2 0 V
3 FE
4
+24 V DC
5 +24 V DC
4 3 2
1 5
PIN Function
1 0 V
2 0 V
3 FE
4 +24 V DC
5 +24 V DC
X2/X3 – PROFINET Port 1 / Port 2
1 2
3 4
Pin Function
1 TD+
2 RD+
3 TD-
4 RD-
PIN Function
1 TD+
2 RD+
3 TD–
4 RD–
X4 – Service interface RS232
1 2
3 4
Pin Function
1 n.c.
2 TxD
3 GND
4 RxD
PIN Function
1 n. c.
2 TxD
3 GND
4 RxD
BIS U-6028-048-1_4-06-ST28
Processor unit