Balluff BVS HS-QC-SDR-MA-01-01 Operation Manual Download Page 67

Page: 67 / 296

www.balluff.com

BVS HS-Q Series
Standard Hand Held Barcode Reader

Enter/Exit Programming Mode

Configuration Using Barcodes

Advanced Formatting: User Label Edit

Advanced formatting is available to create user label edit scripts.

Please contact our TecSupport

for further information!

Case Conversion

This feature allows conversion of the case of all alphabetic characters to upper or lower case.

DEFAULT

$CLF-

Case Conversion = Disable (no case conver-

sion)

$CLF-

Case Conversion = Convert to upper case

$CLF-

Case Conversion = Convert to lower case

Case conversion affects ONLY readed barcode data, and does not affect Label
ID, Prefix, Suffix, or other appended data.

Summary of Contents for BVS HS-QC-SDR-MA-01-01









































































































































































































































































































Search results

Summary of Contents for BVS HS-QC-SDR-MA-01-01

Reviews:

Related manuals for BVS HS-QC-SDR-MA-01-01

Brands by name

Popular brands

Balluff BVS HS-QC-SDR-MA-01-01, Operation Manual

Search results

Summary of Contents for BVS HS-QC-SDR-MA-01-01

Reviews:

Related manuals for BVS HS-QC-SDR-MA-01-01

Brands by name

Popular brands