Balluff BTL7-V50E-M-P-C003 Series, User Manual

Page: 27 / 102

www.balluff.com 5 english
1.1 Validity
This guide describes the construction, function and setup
options for the BTL magnetostrictive linear position sensor
with EtherCAT
®
interface. It applies to types
BTL7-V50E-M _ _ _ _ -P-C003 (see Type code on
page 18).
Read this guide before installing and operating the BTL.
1.2 Symbols and conventions
Individual instructions are indicated by a preceding
triangle.
►
Instruction 1
Action sequences
are numbered consecutively:
1.
Instruction 1
2. Instruction 2
Note, tip
This symbol indicates general notes.
1.3 Scope of delivery
– BTL
– Mounting clamps with insulating sleeves and screws
– Condensed guide
The magnets are available in various models
and must be ordered separately.
1.4 Approvals and markings
Registered trademark and
patented technology. Licensed by
Beckhoff Automation GmbH,
Germany.
The CE symbol confirms that our
products comply with the requirements
of the current EU directive.
The BTL meets the requirements of the following product
standard:
– EN 61326-2-3 (noise immunity and emission)
Emission tests:
– RF emission
EN 55011
Noise immunity tests:
– Static electricity (ESD)
EN 61000-4-2 Severity level 3
– Electromagnetic fields (RFI)
EN 61000-4-3 Severity level 3
– Electrical fast transients (burst)
EN 61000-4-4
Severity level 3
– Surge
EN 61000-4-5
Severity level 2
– Conducted interference induced
by high-frequency fields
EN 61000-4-6
Severity level 3
– Magnetic fields
EN 61000-4-8 Severity level 4
More detailed information on the guidelines,
approvals, and standards is included in the
declaration of conformity.
1
Notes to the user
BTL7-V50E-M _ _ _ _ -P-C003
Magnetostrictive Linear Position Sensor – Profile Style