Balluff BTL6-V11V Series, Configuration Manual

Page: 31 / 40

www.balluff.com 11 english
Create network
Switch to the “Class” tab (the copied elements can be 1.
found here).
Use the mouse to drag the elements into the empty
2.
network.
Arrange the elements in the order of the hardware
3.
components used.
The VSV043 splitter is used in the example. It
can be omitted if the BTL is directly connected
to a VARAN master.
Connect the components as in Figure 5-7. Use the
4.
same VARAN Out connection that is also used in the
actual setup.
Fig. 5-7: Connect components in the network
5
Software example in LASAL CLASS 2 & LASAL SCREEN (continued)
BTL6-V11V-...
Configuration