BTL5-T1_ _-M_ _ _ _-A/B/Y/Z-S103
Micropulse Linear Transducer - Rod Style
english
2
Read this manual before installing
and operating the Micropulse Trans-
ducer.
1.1
Proper application
The BTL5 Micropulse transducer is
intended to be installed in a ma-
chine or system. Together with a
PROFIBUS Master it comprises a
position measuring system and may
only be used for this purpose.
Unauthorized modifications and
non-permitted usage will result in
the loss of warranty and liability
claims.
1.2
Qualified personnel
This guide is intended for special-
ized personnel who will perform the
installation and setup of the system.
1.3
Use and inspection
The relevant safety regulations must
be followed when using the trans-
1
Safety Advisory
ducer system. In particular, steps
must be taken to ensure that should
the transducer system become de-
fective no hazards to persons or
property can result. This includes
the installation of additional safety
limit switches, emergency shutoff
switches and maintaining the per-
missible ambient conditions.
1.4
Scope
This guide applies to the model
BTL5-T1...A/B/Y/Z-S103
Micropulse transducer.
An overview of the various models
can be found in Section 7 Versions
(indicated on part label) on page 9.
Note:
For special versions, which
are indicated by an -SA_ _ _ des-
ignation in the part number, other
technical data may apply (affect-
ing calibration, wiring, dimen-
sions etc.).
Contents
1
Safety Advisory .................... 2
1.1 Proper application ................. 2
1.2 Qualified personnel ............... 2
1.3 Use and inspection ............... 2
1.4 Scope ..................................... 2
2
Function and
characteristics ...................... 3
2.1 Characteristics ...................... 3
2.2 Function ................................. 3
3
Installation ............................ 4
3.1 Mounting ................................ 4
3.2 Transducer, Installation ......... 5
3.3 Magnets, Installation ............. 5
3.4 Using multiple magnets ........ 5
4
Wiring .................................... 6
5
Configuration ....................... 8
5.1 Default settings ..................... 8
5.2 Presets ................................... 8
6
Startup .................................. 9
6.1 Check connections ................ 9
6.2 Turning on the system ........... 9
6.3 Check output values ............. 9
6.4 Check functionality ................ 9
6.5 Fault conditions ..................... 9
7
Versions (indicated on
part label) .............................. 9
7.1 Available stroke lengths
and magnets .......................... 9
7.2 Included in shipment ............. 9
7.3 Software ................................. 9
8
Accessories ........................ 10
8.1 Magnets ............................... 10
8.2 Connection cables,
connectors ........................... 10
8.3 Mounting nut ........................ 10
9
Technical Data .................... 11
9.1 Dimensions, weights,
ambient conditions .............. 11
9.2 Supply voltage (external) ..... 11
9.3 Control signals ..................... 11
9.4 Connection to the
processor ............................. 11
