4
Confirm Communication is Established
3
It is important to confirm the device is talking to the controller; this can be done by verifying status lights on the block just below the aux power ports
and just above the first M12 I/O ports.
Troubleshooting Tips:
n
Some controllers require a power cycle of the device or the controller or both before the communication is established.
n
Make sure there are no IP Address conflicts between devices.
n
Ensure that the devices are connected on the same LAN or hardwired network.
n
EtherNet/IP DLR (Device Level Ring) capable devices ship with the default setting, DLR enabled. Some controllers may require that the device has
this functionality disabled before communication can be established.
Solid Green
Solid green at 100Mbps, off if using 10Mbps
Intermittent flashing orange
Functional
Communication
Is Established:
Depending on which
port has the cable
plugged into it, these
could be on or off
