Balluff BNI PNT-502-105-Z015, User Manual

Page: 10 / 20

Balluff Network Interface Profinet, BNI PNT-502-105-Z015
www.balluff.com
9
4 Technical data
4.5.
PROFINET
PROFINET port 1 x 10Base-/100Base-Tx
Connection for PROFINET port M12, D-coded
Cable types per IEEE 802.3 Shielded twisted pair min. STP CAT 5/ STP CAT 5e
Data transmission rate 10/100 Mbit/s
Max. cable length 100 m
Flow control Half Duplex/Full Duplex (IEEE 802.33x-Pause)
4.6.
Function indicators
Modul status
LED Anzeige Funktion
US
green Input power OK
red Low Input power (<18V)
UA
green Output power OK
red Low Output power (< 18V)
SF
off No error
red Watchdog timeout; channel, generic or extended diagnosis
present; system error
red flashing DCP signal service is initiated via the bus
BF
off No error
red No configuration; or low speed physical link; or no physical
link
red flashing No data exchange
100
off Bus clock: 10 Mbit/s
yellow Bus clock: 100 Mbit/s
LK green Data transfer
Port Standard Port
Status Function
off State of the Input or Output Pin is 0
yellow State of the Input or Output Pin is 1
IO-Link Port
Status Function
green IO-Link connection established
green flashing No IO-Link communication
red flashing Validation failed
Status
Port configuration
Diagnostic Input Input Output
red Input low
short-circuit
Pin 1 und 3
short-circuit
on output Pin
red short flashing - -
short-circuit
Pin 1 und 3
Status
–LEDs: Modul status
Port/Pin LEDs:
Status of the IO Link and I/O ports