Balluff Network Interface
EtherNet/IP™, BNI EIP-50x-105-R015
www.balluff.com
38
9
Web Server
9.3.
Diagnostic Pro-
cess
On this page you can read some information about the current process data of the module
and the status shown by the corresponding LEDs.
If an IO-Link device is connected to one of the configured IO-Link terminals, some of the
device data will be displayed in addition to the module data.
Clicking the text takes you to the "Device Properties" screen.
Tip
You can monitor only the process data and the current status of the module. It is
not possible to configure a module or set the output data.
In this case, you have to use the control unit together with the corresponding soft-
ware.
