Balluff BNI EIP-502-105-R015, User Manual

Page: 87 / 274

Balluff Network Interface EtherNet/IP™
www.balluff.com
30
7 Process Data
7.1. Process Data
Inputs
The input data size is 200 bytes. Take a look at the tables below for the allocation of the
process data inputs.
BNI EIP-502-105-R015
Byte Module part Description
0…7 Standard I/O ports Process data inputs at the standard inputs
8…55 IO-Link port 1 Process data inputs at IO-Link port 1
56…103 IO-Link port 2 Process data inputs at IO-Link port 2
104…151 IO-Link port 3 Process data inputs at IO-Link port 3
152…199 IO-Link port 4 Process data inputs at IO-Link port 4
BNI EIP-508-105-R015
Byte Module part Description
0…7 Standard I/O ports Process data inputs at the standard inputs
8…55 IO-Link Port 0 Process data inputs at IO-Link port 0
56…103 IO-Link port 1 Process data inputs at IO-Link port 1
104…151 IO-Link port 2 Process data inputs at IO-Link port 2
152…199 IO-Link port 3 Process data inputs at IO-Link port 3
200…247 IO-Link port 4 Process data inputs at IO-Link port 4
248…295 IO-Link port 5 Process data inputs at IO-Link port 5
296…343 IO-Link port 6 Process data inputs at IO-Link port 6
344…391 IO-Link port 7 Process data inputs at IO-Link port 7
Standard Input
Data BNI EIP-502-105-R015 and BNI EIP-508-105-R015
Byt
e
Bit
Description
7 6 5 4 3 2 1 0
0 I32 I34 I22 I24 I12 I14 I02 I04
Input data
I04

Input at port 0, pin 4
The result is 0 only if the port is
configured as an IO-Link port.
1 I72 I74 I62 I64 I52 I54 I42 I44
2 S3 S2 S1 S0
Short-circuit status
Short-circuit between pin 1 and 3
at the registered port
3 S7 S6 S5 S4
4 O32 O34 O22 O24 O12 O14 O02 O04
Overload status
O04

Overload at port 0, pin 4
Only if the port is configured as an
output.
5 O72 O74 O62 O64 O52 O54 O42 O44
6 0 0 0 0 0 NA PS PA
Status of the power supply
NV: No actuator power supply
PS: Power supply for sensor
PA: Power supply for actuator
7 0 0 0 0 0 0 0 0 Reserved