Balluff Network Interface EtherNet/IP
™
www.balluff.com
16
7
Display
7.1.
General
With the implemented display, the address is set directly on the BNI EIP… devices.
The following address types are implemented:
IP address
Subnet mask
Gateway address.
Each address type consists of 4 octets.
Additional the display shows information about the hard- and firmware revision.
There is a lock function for the display which can be activated out of the control system. If
th
e lock is set editing isn’t possible anymore (see Bit layout, chapter 8 „Appendix“).
Address Defaults
IP Address: 169.254.1.1
Subnetmask: 255.255.255.0
Gatewayaddress: 0.0.0.0
Controls and
Visualization
1
Display
2
Arrow-Key
3
Octet-Cursor
4
Address type cursor
5
Set-Key
6
LED
Display
Information
IP: IP address
SN: Subnet address
GW: Gateway address
0: fourth octet
1: third octet
2: second octet
3: first octet
S
↑
IP
SN
GW
3 2 1 0
1
2
3
4
5
6
GW
IPI
PI
0
1
2
3
Cursor for selecting octet
Cursor for
selecting address type
SN
IP
