Balluff Network Interface CC-Link IE Field Basic
www.balluff.com
10
5
Integration
General
The module is used as a remote I/O module and/or IO-Link module for connecting to a CC-
Link IE Field Basic network. In the following an example is used to explain how the module
can be incorporated into a network with a Mitsubishi Master Station.
For integration the Mitsubishi Engineering Tool GxWorks3 is used.
Network
parameters
Open the setting window by means of the
following operation.
Depending on the CPU this option may
have a different name:
Version 1:
Project window
→
Parameter
→
*the
corresponding CPU module*
→
Module
Parameter
→
Ethernet Port
Version 2:
Project window
→
Parameter
→
*the
corresponding CPU module*
→
Module
Parameter
In this window you can now configure the CC-Link IE-Field Basic Master Station.
•
"Own Node Settings" describes the configuration of the PLC and master station.
•
Under "CC-Link IEF Basic Settings" you must enable "To use or Not to Use CC-
Link IEF Basic Setting". Under "Network Configuration Settings" and "Refresh
Settings" you can make additional settings for CC-Link IE Field Basic.
