Balluff BMF 415KW-HA Series, User Manual

Page: 40 / 218

14
6
IO-Link interface (continued)
6.5 Parameter data
Index Subindex Parameter Size Access Data storage
FSS (Fixed Switching Signal)
0x0039 (57) 0 FSS Logic (see section 6.5.1) 1 byte Read/Write X
Device Configuration
0x00B4 (180)
0 Output Type (see section 6.5.2) 1 byte Read/Write X
0x00F8 (248) 0,1,2 Diagnosis Suppression Configuration
(see section 6.5.4)
2 bytes Read/Write X
0x0420 (1056) 0 Disturbance Suppression Duration
(see section 6.5.3)
2 bytes Read/Write X
Condition Monitoring
0x0052 (82) 0,1,2,3,4,5 Device Temperature (see section 6.5.5) 10 bytes Read Only
0x0053 (83) 0,1,2 Temperature Thresholds (see section 6.5.6) 4 bytes Read/Write X
0x0057 (87) 0,1,2,3 Operating Hours (see section 6.5.7) 12 bytes Read Only
0x0058 (88) 0 Boot Cycle Counter (see section 6.5.8) 4 bytes Read Only
System parameters
0x0003 (3) 0, 1, 2, 3, 4, 5 Data Storage (see section 6.5.9) 39 bytes Read/Write
0x000C (12) 0 Device Access Locks (see section 6.5.10) 2 bytes Read/Write X
0x000D (13) 0, 1, 2 ProfileCharacteristic (see section 6.5.11) 4 bytes Read Only
0x000E (14) 0 PD Input Descriptor (see section 6.5.12) 3 bytes Read Only
Tab. 6-5: Parameter data of IO-Link interface
6.5.1 FSS (Fixed Switching Signal)
Index Subindex Name Size Access Values
FSS 0x0039 (57) 0 FSS Logic 1 byte Read/Write
0 = high active
1 = low active
Tab. 6-6: Parameter Fixed Switching Signal
6.5.2 Output configuration
Index Subindex Name Size Access Values
Output Type
0x00B4 (180)
0 Switching output Out 1 1 byte Read/Write
0 = Deactivated
1 = PNP (default)
2 = NPN
3 = Push-Pull
Tab. 6-7: Parameter output configuration
Fig. 6-1:
Sensor
frontend
PD
Yellow LED Process Data
FSS Logic:
0 = high active
1 = low active
Out 1
Illustration of the output circuit
BMF 415KW-HA _ _ _ -W-5- _ _ -…
Magnetic Field Sensors
english