Balluff IO-Link System
BIC 1B0-ITA50-Q40KFU-SM4A4A (Base)
BIC 1B0-IT005-Q40KFU-SM4A4A (Base)
BIC 2B0-ITA50-Q40KFU-SM4A5A (Remote)
www.balluff.com
2
1 Safety
1.1. Installation and
startup
Attention!
Installation and startup are to be performed only by trained specialists. Qualified
personnel are persons who are familiar with the installation and operation of the
product, and who fulfills the qualifications required for this activity. Any damage
resulting from unauthorized manipulation or improper use voids the
manufacturer's guarantee and warranty. The Operator is responsible for
ensuring that applicable of safety and accident prevention regulations are
complied with.
1.2. General safety
instructions
Commissioning and inspection
The operating company shall be responsible for observance of locally applicable safety
instructions.
Before commissioning, carefully read the operating manual.
The system must not be used in applications in which the safety of persons is dependent on
the function of the device.
Authorized Personnel
Installation and commissioning may only be performed by trained specialist personnel.
Intended use
Warranty and liability claims against the manufacturer are rendered void by:
•
Unauthorized tampering
•
Improper use
•
Use, installation or handling contrary to the instructions provided in this operating
manual
Obligations of the Operating Company
The device is a piece of equipment from EMC Class A. Such equipment may generate RF
noise. The operator must take appropriate precautionary measures. The device may only be
used with an approved power supply. Only approved cables may be used.
Malfunctions
In the event of defects and device malfunctions that cannot be rectified, the device must be
taken out of operation and protected against unauthorized use.
Hazardous
voltage
Attention!
Disconnect all power before servicing equipment.
Intended use
Attention!
Inductive coupling systems (BIC) are devices for contactless energy and
signal transmission in industrial environments.
Prohibited is the use:
•
in environment with explosive atmosphere.
•
in application where the safety of persons or machines depends on the
transmitted signals. (Safety circuits)
1.3. Safety
instructions
Caution!
Risk of burning on hot surfaces! The sensing surface heats up under normal
operating conditions.
Keep hands and objects away from the active surface.
Metallic objects should not reach the area between the sensing surfaces
of the base and remote units.
Fire hazard!
1.4. Differing views
Product views and images in this manual may differ from the product described. They are
intended to serve only as illustrations.
