www.balluff.com
2
english
BAM OF-VS-004-__-38
Filter set
955829_AB ∙ EN ∙ A23; subject to modification. Replaces I22.
Cleaning
The filter can be cleaned with a soft cloth. Persistent dirt
can be removed with a cloth that is first moistened with a
soap solution and wrung out.
►
After wiping off the dirt spots, wipe the Ident sensor
with a dry cloth.
Installation (contiuned)
Step 3: Insert AG1 filter
►
Insert the filter from the filter set.
When using the polarizing filter, make sure that the
side covered with foil is inserted in the direction of
the camera.
Step 4: Insert AG1 filter ring
►
Insert the filter ring from the filter set and ensure that
both the 6 drilling holes of the filter ring are above the
drilling holes for the filter as well as the 4 clearances
of the filter ring are above the mounting screws of the
housing.
Step 5: Fix AG1 filter ring
►
Fix filter ring with the 6 countersunk-head screws (DIN
965; M2x5) using a star screwdriver with a tightening
torque of 16 Ncm.
Balluff GmbH
Schurwaldstrasse 9
73765 Neuhausen a.d.F.
Germany
Tel. + 49 7158 173-0
Fax +49 7158 5010
[email protected]
