Balluff BAE011H, User Manual, Page: 89 / 118

www.balluff.com
29
Preselection 6 Menu
MODE 6
Switching conditions for preselection 6. see chapter PRESELECTION 1 MENU (except the trailing
value)
See chapter PRESELECTION 1 MENU
6 RES>=PRES-
TRAIL
Trailing PRESELECTION 6:
Display value is greater or equal PRESELECTION 6 – PRESELECTION 3

ON,
PRESELECTION 3 is the trailing value from PRESELECTION 6
HYSTERESIS 6
This parameter defines the switching hysteresis of the switch-off point for preselection 6.
See chapter PRESELECTION 1 MENU.
PULSE TIME 6 (S)
Duration of output pulse for the switching condition of preselection 6.
See chapter PRESELECTION 1 MENU.
OUTPUT TARGET 6
Assignment of an output for the switching condition of preselection 6.
See chapter PRESELECTION 1 MENU.
0 NO
No assignment
1 CTRL OUT 1 Switching condition assigned to “Ctrl. Out 1”
2 CTRL OUT 2
Switching condition assigned to “Ctrl. Out 2”
3 CTRL OUT 3
Switching condition assigned to “Ctrl. Out 3”
4 CTRL OUT 4
Switching condition assigned to “Ctrl. Out 4”
5 CTRL OUT 5
Switching condition assigned to “Ctrl. Out 5”
6 CTRL OUT 6
Switching condition assigned to “Ctrl. Out 6”
OUTPUT POLARITY 6
Polarity for the switching condition of preselection 6.
See chapter PRESELECTION 1 MENU.
OUTPUT LOCK 6
Latch for the switching condition of preselection 6.
See chapter PRESELECTION 1 MENU.
START UP DELAY 6 (S)
Start-up suppression for the switching condition of preselection 6.
See chapter PRESELECTION 1 MENU.