BallistiGlass BallistiScan Quick Start Manual Download

Page: 2 / 3

WWW.BALLISTIGLASS.COM

(800) 960‐4097

BALLISTIGLASS LLC

PARKLAND, FL 33076 USA

Step 1: Set up equipment

1. Set up the stanchions (barrier poles) 4 feet apart.

2. Open the BallistiScan case, remove laptop PC, and set aside the 2 metal sensors.

3. Attach the two sensors on top of the stanchions using the supplied Velcro strips.

Figure 1: The sensors must be oriented perpendicular to pedestrian traffic using the

red lines

(imaginary) formed between screws as a guide.

4. To protect pedestrians from tripping over the sensor cables, cover the pathway with a mat.

Digital Signal Processor (DSP)

USB cable (already attached to DSP)

DSP power cable (already attached to DSP)

Sensors with cables already attached to DSP

Summary of Contents for BallistiScan

Page 1: ...FL 33076 USA BALLISTIGLASS and BALLISTISCAN are registered trademarks of Ballistiglass LLC All rights reserved BallistiScan Quick Start Guide A quick start video is available at www ballistiglass com...

Page 2: ...ove laptop PC and set aside the 2 metal sensors 3 Attach the two sensors on top of the stanchions using the supplied Velcro strips Figure 1 The sensors must be oriented perpendicular to pedestrian tra...

Page 3: ...PC and press the power button to start No password is needed 4 Click on the metal detector s icon in the task bar 5 Click on the Setting icon 6 Click on the USB radio button Then click the Apply butto...