Page 3 of 3
STEP 1:
NOTE: Before starting assembly of this Lamp, be sure it has been unplugged.
Turning the switch off is not sufficient enough.
Squeeze the Harp (C) ends into the
Saddle of the Lamp Body (A).
STEP 2:
Place the Shade (not included) over the
Harp (C) top. Secure it on top by
screwing on the Finial (B) until it is snug.
STEP 3:
Screw in Bulb (not included). This Lamp has
been rated for up to a 100 Watt MAX Type
A Bulb or 25 Watt CFL bulb.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
To clean, wipe the Fixture with a soft, dry cloth.
Avoid the use of harsh or abrasive
chemicals as they may damage the finish
(A)
(C)
Saddle
(B)
(C)
