21
Pairing Your Remotes and Shades
20
Adjusting Your Shade’s Limits and Home Position
We preprogrammed your remotes to operate your shades.
However, you might decide to adjust the pairing—for example,
you might lose a remote and need to pair a new one, or you
might buy an additional remote after you buy your shades. This
section shows you how to pair remotes and shades for a variety
of control scenarios.
To make the instructions easy to follow, steps for the multi-
channel remote are separated into their own section.
PAIRING YOUR REMOTES
AND SHADES
NOTE
If you don’t press any buttons for 10 seconds while you’re making these
adjustments, the remote will time out. If that happens, just start the
process over.
1. Use the UP or DOWN buttons to
move the shade to your new home
position. This can be anywhere
between the upper and lower limits.
2. Press and hold the MENU/RIGHT
button for 2 seconds to enter
the menu.
For the Multi-Channel Remote
3. Select SHADE > SET HOME.
4. Select the shade you want to set
the home position for by scrolling
left or right.
5. Press and release the HOME button.
The shade will jog. This means you’ve set
your new home position.
Legend
Press and hold
Move up
Press and release
Move down
