4
LED (Light) Locations and Battery Status
LED Light Bar
Light indicator
on the front of
the controls
Shade LED
Light indicator on
the shade end
Remote LED Indications
If the battery within the remote is completely discharged, there will be no
LED feedback when a button is pressed. Always replace battery as a first
solution if the LED does not light with a button press.
Replacement battery: #CR2430 Lithium Coin
Shade LED Indications
The shade LED is located on the end of your shade and provides
additional valuable feedback. Avoid excessively bright conditions for
better visibility. If there is no operation or LED indication when a
command is sent to the shade motor, replace the batteries.
Replacement batteries: Eight AA Lithium per battery case; larger shades
may require multiple battery cases.
LED Action
When
Definition
Green flashing only
After button press
Remote battery
is good
Amber flash after
green flash sequence
After button press
Remote battery is low
Red flash after green
flash sequence
After button press
Remote battery
require replacement
LED Action
When
Definition
Amber flashing
After motor operation
Shade batteries are
at approximately 20%
Red flashing
After motor operation
Shade batteries
require replacement
