10
Adding Remotes and Creating Groups
Adding a New Remote When the Only Remote Controlling the Shade is Lost
1. Press and hold the program button on the
headrail/motor end. The LED will flash green
then amber (about seven seconds). When the
shade jogs once, release the button and the
LED will turn solid amber and turn off. The
motor is now ready to be associated to a new
remote. (Fig. 9)
2x
Your motorized shades are preprogrammed from the factory with the appropriate pairing and grouping between remotes
and shade motors. However, there are several scenarios when additional programming steps are required. The next
sections explain how to accomplish the most common scenarios you might encounter. If the appropriate scenario is not
included, please contact a customer service representative prior to attempting any adjustments.
If you no longer have your remote, or the remote has been damaged and no longer works, follow these steps.
2. Using a paper clip or a similar item, press and
release the programming button located on
the back side of the new remote twice in rapid
succession (two taps). The LED on the remote
will alternately flash amber and green. (Fig. 10)
3. Press and hold the program button on the
headrail/motor end, and release when the
LED flashes green (about three seconds). The
shade will jog and all LEDs will turn off. The
shade will now operate from the newly added
remote. (Fig. 11)
A time-out can occur during programming the remote or motor. When no buttons are pressed within
a predetermined amount of time (about 20 seconds), the remote or motor will revert back to a user
state. Simply repeat programming steps if the remote or motor has timed-out.
Fig. 9
Fig. 11
Fig. 10
Hold
Hold
Hold
Hold
