Use and maintenance manual
Circular saw SHARK
47
FOR CARDAN MODELS
Lock the tractor with the parking handbrake and set the tractor's PTO to 350 rpm (
model 750
)
or 290 rpm (
model 700
).
With the engine idling, run the machine for about one minute.
Lock the tractor with the parking handbrake.
FOR ELECTRIC MODELS
Press the
green ON
button on the magnetothermal switch and run the machine for about one
minute.
FOR INTERNAL COMBUSTION ENGINE MODELS
Refer to the enclosed engine manual.
MODE OF USE
Release the retaining hook of the tilting table.
Place the log to be cut on the tilting table and adjust the length of the log support device (
ref. J,
para. 1.3.2
) so that the wood to be cut is positioned stably.
Calibrate the cutting length adjustment device (
A).
Hold the handle and release lever located at the top of the
tilting table with one hand, and with the other hold the log
locking lever
.
Move the handle forward towards the blade, possibly pushing with the side of the body on the
roller on the edge of the table to facilitate cutting.
Make the cut.
Summary of Contents for SHARK Series
Page 2: ......
Page 59: ...Use and maintenance manual Circular saw SHARK 58 NOTES...
