balfor SHARK Series, Technical Manual, Page: 4 / 59

Use and maintenance manual
Circular saw SHARK 3
CIRCULAR SAW FOR FIREWOOD
CARDAN (C), CONVEYOR BELT (CNT), INTERNAL COMBUSTION ENGINE (SB) MODELS
It complies with all relevant provisions of the following European Directive:
Directive 2006/42/CE on machinery and amending directive 95/16/CE.
Having applied the following harmonised standards and technical specifications for the adaptation of
the machine, to the extent that they are relevant:
UNI EN ISO 12100:2010 “Safety of machinery
– General design principles – Risk assessment and risk
reduction”.
UNI EN ISO 13489-1:2016 “Safety of machinery - Safety-related parts of control systems - Part 1:
General design principles”.
UNI EN ISO 4254-1:2015 “Farm machinery - Safety - Part 1: General requirements”.
UNI EN 1870-6:2018 “Safety of woodworking machines - Circular saws - Part 6: Circular saws for
firewood”.
UNI EN 847-1:2018 “Woodworking tools - Safety requirements - Part 1: Milling cutters and circular saw
blades”.
ISO 11684 “Tractors, agricultural and forestry machinery, garden machinery - Safety signs and risk
warning pictograms - General principles”.
UNI EN ISO 11688-1:2009 “Acoustics – Practical suggestions for the design of low-noise machinery
and equipment - Part 1: Planning”.
Person authorised to compile the technical file:
Technical Department – Gianluca Ballario at company headquarters offices.
The legal representative