BVRD Network
Installation Instructions
BVRDNET issue 3
3
2 BVRD Network
Installation
2.1 BVRDCIF & BVRDFIF/S M
ODULES
The BVRDCIF and BVRDFIF/S Interface modules are both DIN
Rail mounted and connect to the BVRD2M/4 using standard
RJ45 patch leads. BVRDFIF/S modules require a Wurth 742-
71221 cable ferrite installing so that the cable passes through the
ferrite 2 times. The ferrite should be located as close to the
BVRDFIF/S as possible.
Figure 2.1 — Typical BVRDCIF & BVRDFIF/S modules
Both interface modules include an LED that will flash to show
valid network communications.
