(1) 2*AAA and 2*AA batteries should be prepared.
(2) Use new and high quality alkaline batteries.
(3) Never mix the old and new batteries.
(4) Heavy duty or low quality recharge batteries are not recommended.
(1) Open the cover of the sensor. Set up the sensor channel to CH1.
(2) Open the cover of the main unit. Inset 2 new “AAA” standard alkaline
batteries into the main unit. All icons on the screen of the main unit will light
up for 2-3 seconds, you will hear a beep, and the main unit will start to detect
the indoor temperature and humidity.
(3) Press the “CH/▲” button to set the main unit channel to CH1, matching
the remote sensor’s.
(4) Inset 2 new “AA” standard alkaline batteries into the sensor in 3 min.
The signal flashing indicates that main unit is receiving the outdoor
temperature and humidity from sensor. The receiving status will last for max
3 minutes. The signal will stop flashing after received or 3 minutes later.
(5) Please allowed the main unit and outdoor sensor at the same position for
half an hour or more after powering on.
(1) 12H or 24H Format: Press and hold the "Set/C/F" button for 3-4 secs to
start setting, the 12 or 24 Hour Format display begins to flash.
2.1 Before Start
2.2 Initial Setting
Step 1: Get the Indoor and Outdoor Humidity & Temperature.
Step 2: Set Time/Calendar/Week Language/Key Tone in order :
12H/24H > Hour > Minute > Year > MD/DM > Month > Date >
Week Language > Key Tone OFF/ON > Exit
2.QUICK SETUP
7
Summary of Contents for B0341WST2H2-V3
Page 2: ......
