(9) Key Tone: The “ON ” display will flash. Default setting is ON. Press the
“ CH/▲” or “MEM/▼” button to turn ON or OFF. Press the "Set/C/F" button
to confirm. After all above steps are finished, the device will automatically
exit.
(Note: The device will automatically save and exit after 20 seconds
without any operation.)
Tip: For example, I accidentally set up the wrong "Year" data. What can I do?
Please continue to finish the all time setting.
Then press and hold the "Set/C/F" button for 3-4 secs to start setting and
Press continuously the "Set/C/F" button to confirm until enter the " Year"
setting and set the correct year.
（
Please refer to “Year Setting”
）
The data of weather forecast and outdoor humidity & temperature come from
outdoor sensors. Make sure the outdoor sensor place in proper place.
Take an example.
If place the sensor there,
the temperature goes up,
the humidity goes down.
If place the sensor here,
the temperature goes down,
the humidity goes up.
Step3: How to Mount the Outdoor Sensor and Get More Accurate
Value
？
9
Summary of Contents for B0341WST2H2-V3
Page 2: ......
