![Baldor STANDBY PERMANENT MOUNT SERIES Operator'S Manual Download Page 8](http://html1.mh-extra.com/html/baldor/standby-permanent-mount-series/standby-permanent-mount-series_operators-manual_3621303008.webp)
Baldor Generator Features
■
Baldor generators are manufactured in a certified
ISO9001 facility located in Oshkosh, Wisconsin.
■
Every generator is design, prototype, and
production tested
■
Brushless synchronous four-pole alternator
■
Industrial grade exhaust silencer
■
Engine block heater
■
Baldor gensets attain one step load acceptance
of nameplate rating
■
PowerPAC 4 controller includes low oil pressure
shutdown, high coolant temperature shutdown,
overspeed and overcrank indicators
■
Flexible exhaust connection
■
■
Installation and operation manual
■
Worldwide network of parts and service
Generator Ratings
150 C Rise
125 C Rise
Standby Rating
Continuous Rating
Voltage
PH
Hz
kW/kVA
Amps
kW/kVA
Amps
120/240
1
60
25.0/25.0
104.2
Options
■
Exhaust silencer: Critical
■
Single wall sub base fuel tank
■
Double wall UL 142 approved sub-base fuel tank
■
Battery charger 12V float
■
Line circuit breaker
■
Flexible fuel lines
■
Weather protective enclosure
4 Cycle
D
iesel
L
iquid
C
ooled
Standby Power Ratings
60Hz
kW
27.5
27.5
kVA
Continuous Power Ratings
60Hz
kW
25
25
kVA
Farm Duty 1-Phase
Model: D
LC
25
Baldor
POWER SYSTEMS
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Assembled in USA
Battery rack and cables
Ratings: -
Standby Ratings:
Standby ratings are applicable for supplying emergency power for the duration of a utility power outage. Primary power to the installation is
utility supplied. No overload capability for standby rating. Standby ratings in accordance with ISO 3046, BS55114, DIN 6271.
Continuous Power Rating:
Continuous power
is the maximum power available for continuous duty. A 10% overload capacity is available for 1 hour out of 12 hours of operation. Prime power ratings in accordance with
ISO 3046, BS55114, DIN 6271. For additional information, please consult factory. Manufacturer reserves the right to implement specifications or design changes without
notice.
Single phase:
Single phase units are rated at 1.0 (Unity) power factor.
WARNING:
Do not connect generator to any building's electrical system unless a
disconnect switch has been installed
.
27.5/27.5
114.6
Summary of Contents for STANDBY PERMANENT MOUNT SERIES
Page 33: ......