Baldor STANDBY PERMANENT MOUNT SERIES Operator'S Manual Download Page 41

LIMITED WARRANTY 

 

Unless otherwise provided, Baldor generators are warranted against defects in Baldor workmanship and 
materials for a period of time as set forth in the Warranty Period chart on the following page.  All warranty 
claims must be submitted to a Baldor Generator repair facility prior to the expiration of the warranty 
period.  Baldor Generators shall have no responsibility or liability for any defect, latent or otherwise, 
discovered after the expiration of the warranty period provided herein.  Extended warranties are available 
for certain Baldor products.  These warranties are described in Baldor’s catalog and other sales literature.  
Extended warranties are subject to the terms and conditions of this Limited Warranty as modified by the 
additional terms of the extended warranty.  If a Baldor product is defective due to Baldor workmanship or 
materials and the defect occurs during the warranty period, then Baldor will either repair the product or 
replace it with a new one, whichever Baldor believes to be appropriate under the circumstances.  Warranty 
service is available for all Baldor Generator products from Baldor Generators’ Customer Service 
Department in Oshkosh, Wisconsin, and from Baldor Generator repair facilities.  A list of Baldor’s 
generator repair facilities may be obtained by contacting Baldor Generators at:  Customer Service, Baldor 
Generators, 3815 Oregon Street, Oshkosh, Wisconsin 54902, 920-236-4200 (telephone), 920-236-4219 
(facsimile).  All Baldor products requiring warranty service shall be transported or shipped freight pre-paid, 
at the risk of the party requiring warranty service, to Baldor Generators’ Customer Service Department in 
Oshkosh, Wisconsin, or to a Baldor Generator repair facility.  Written notification of the alleged defect in 
addition to a description of the manner in which the Baldor generator is used, and the name, address and 
telephone number of the party requiring warranty service must be included.  Baldor is not responsible for 
removal and shipment of the Baldor product to the service center or for the reinstallation of the Baldor 
product upon its return to the party requiring warranty service.  Customers who are unable to take or ship 
the Baldor product to a Baldor Generator repair facility, or who desire a repair to be made by other than a 
Baldor Generator repair facility, should contact Baldor Generators’ Customer Service Department at 
920-236-4200.  Baldor, in advance of such service, must approve a repair by anyone other than a Baldor 
Generator repair facility in writing.  Problems with Baldor products can be due to improper maintenance, 
faulty installation, non-Baldor additions or modifications, or other problems not due to defects in Baldor 
workmanship or materials.  If a Baldor Generator repair facility determines that the problem with a Baldor 
product is not due to defects in Baldor workmanship or materials, then the party requiring warranty service 
will be responsible for the cost of any necessary repairs.  Parties requiring warranty service not satisfied 
with a determination that a problem is outside of warranty coverage should contact Baldor Generators’ 
Customer Service Department at 920-236-4200 for further consideration.  EXCEPT FOR THE 
EXPRESSED WARRANTY SET FORTH ABOVE, BALDOR GENERATORS DISCLAIMS ALL 
OTHER EXPRESSED AND IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES 
OF FITNESS FOR A PARTICULAR PURPOSE AND MECHANTABILITY.  NO OTHER 
WARRANTY, EXPRESSED OR IMPLIED, WHETHER OR NOT SIMILAR IN NATURE TO ANY 
OTHER WARRANTY PROVIDED HEREIN, SHALL EXIST WITH RESPECT TO THE GOODS SOLD 
UNDER THE PROVISIONS OF THESE TERMS AND CONDITIONS.  ALL OTHER SUCH 
WARRANTIES ARE HEREBY EXPRESSLY WAIVED BY THE BUYER.  UNDER NO 
CIRCUMSTANCES SHALL BALDOR GENERATORS BE LIABLE OR RESPONSIBLE IN ANY 
MANNER WHATSOEVER FOR ANY INCIDENTAL, CONSEQUENTIAL OR PUNATIVE 
DAMAGES, OR ANTICIPATED PROFITS RESULTING FROM THE DEFECT, REMOVAL, 
REINSTALLATION, SHIPMENT OR OTHERWISE.  This is the sole warranty of Baldor Generators and 
no other affirmations or promises made by Baldor Generators shall be deemed to create an expressed or 
implied warranty.  Baldor Generators has not authorized anyone to make any representations or warranties 
other than the warranty contained herein. 

 
 
 

Revised\Effective 6/26/03 
Form # S-PSG-003-3 

 

                   Warranty Policy S-PSG-003-3.doc 

  

Summary of Contents for STANDBY PERMANENT MOUNT SERIES

















































Reviews: