2
R-SERIES 3-15/16”–12” and all series of RTL and RXT
Supply line requires the user to provide ¾ NPT hose, inlet
adapter (see chart), pipe nipple and standard “T” fitting.
Hose length is limited by the motor’s ability to supply oil to
the bearing. Connect the output of the filtration unit to the
two Sleevoil circulating inlet kits using the “T” fitting.
ATTACHMENT DIMENSIONS
R-SERIES
Bore
Size
R Series
Circ. Oil
Inlets
Inlet
Pipe
NPT
Size
Circ. Oil
Drain Hole
NPT Hole
Alt. Oil
Gauge
Hole
NPT
Size
STL
SSL
3-15/16”
2
1/4”
3/4”
3/4”
1/2”
4-7/16”
2
1/4”
3/4’
1”
1/2”
4-15/16”
2
1/4”
1”
1-1/4”
1/2”
5-7/16”
2
1/4”
1”
1-1/4”
3/4”
6”
2
1/4”
1”
1-1/4”
3/4”
7”
2
1/4”
1-1/4”
1-1/4”
3/4”
8”
2
1/4”
1-1/4”
1-1/4”
3/4”
9” PL
2
1/4”
1-1/4”
1-1/4”
3/4”
10” PL
2
1/4”
1-1/4”
1-1/4”
3/4”
12” PL
2
1/4”
1-1/2”
1-1/2”
3/4”
9” XC
2
1/4”
1-1/2”
1-1/2”
3/4”
10” XC
2
1/4”
1-1/2”
1-1/2”
3/4”
RTL Supply Line
All plumbing (oil and water) should be cleaned and flushed
before being connected to the pillow block. These systems
should be tested before the bearing is put into operation.
Insert the two pipe nipples though the holes in the housing
cap and screw them tightly into the liner.
Install grommet, grommet plate and collar over each inlet
pipe. Press down on collar and tighten collar set screw.
Connect oil filtration lines so that each inlet receives an
equal amount of oil.
ATTACHMENT DIMENSIONS
RTL Supply Line
Bore
Size
RTL Series
Circ. Oil
Inlets
Inlet Pipe
NPT Size
Circ. Oil
Drain Hole
NPT Size
Alt. Oil
Gauge
Hole
NPT Size
3-7/16”
2
1/4”
1-1/2”
3/4”
3-15/16”
2
1/4”
1-1/2”
3/4”
4-7/16”
2
1/4”
1-1/2”
3/4”
4-15/16”
2
1/4”
2”
3/4”
5-7/16”
2
1/4”
2”
3/4”
6”
2
3/8”
2”
3/4”
7”
2
3/8”
2”
3/4”
8”
2
3/8”
2”
3/4”
9”
2
3/8”
2”
3/4”
10”
2
3/8”
2-1/2”
3/4”
12”
2
3/8”
2-1/2”
3/4”
RXT Supply Line
Inlet pipe plugs are already on pillow block. Connect oil
filtration lines so that each inlet receives an equal amount of
oil.
The pressurized oil is delivered to the 2 openings on the
downswing side of the pillow block when the radial load is
directed into the base and the upswing side when the radial
load is directed into the cap.
Circulating Oil Inlets