![background image](http://html2.mh-extra.com/html/baldor/dg-series/dg-series_operators-manual_3561248014.webp)
2.
The brand or design of the electric motor.
The expected starting current for a particular
size motor will vary depending on the brand of the electric motor as well as the type of
electric motor (Split Phase, capacitor, Repulsion-induction type, etc…).
3.
The condition of the electric motor
. A clean motor with free turning bearings will require
less starting currents than a similar type motor that is dirty and the bearings are not as free
turning as they used to be.
ORDERING PARTS
When Generator repair parts are needed, they may be obtained by calling the Customer Services
Department at Baldor Generators or the nearest local office of Baldor Electric Company. Accurate
information such as the following will assure that you receive accurate parts for your particular
generator:
1. Provide the model of the generator set.
2. Provide the serial number of the generator set.
3. A complete and accurate description of the part along with a part number (if known).
4. Quantity of parts.
NOTE:
Engine parts can usually be obtained from a local representative of your engine
manufacturer via the information in the engine manufacturer’s owner’s manual.
Baldor generator can obtain engine parts if necessary. However we do not stock engine parts nor
are we a dealer in engine parts.
SERVICE
Service for your generator set can be obtained from the Customer Services Department at Baldor
Generators by calling (920) 236-4200. Please have the following information available prior to
contacting the factory:
1. The model of the generator set.
2. The serial number of the generator set.
3. A complete and accurate description of the problem.
- 7 -
Summary of Contents for DG Series
