Baldan PNA 3000, Instruction Manual

Page: 44 / 72

Instruction Manual
PNA 44
1
ƒ
Work
• Preparing the PNA 3000 whitout an iron wheel for work
Before starting work with the PNA 3000 without an iron wheel , proceed as follows:
01 - Turn the blade (1) fully to one side, fastening it in the last hole of the horizontal adjustment,
making it easier for the PNA 3000 to pass through narrow places.
Before working with the PNA,
make sure that the blade (1)
is properly fastened.
ATTENTION
IMPORTANT
When making this adjustment,
make sure that there are no
people near the PNA.
NOTE
Do the same procedure as
above to work with the PNA
5000.
02 - Then activate the hydraulic cylinder (2) of the wheel axle (3) to lower the PNA 3000 .
1
2