Baldan PNA 3000, Instruction Manual

Page: 21 / 72

Instruction Manual
PNA 21
2
1
9
9
10
11
4
3
5
6
17
15
10
11
14
13
18
16
7
ƒ
Assembly
• Assembling the blade (Blade rotation hydraulic system)
To assemble the blade with a rotation hydraulic system, proceed as follows:
01 - Couple the back support (1) to the pillar (2), fastening it through the bushing (3), screw (4),
lock washer (5), and nut (6).
02 - Then, attach the hydraulic cylinder (7) to the rear support (1) fastening it through the bearings (9),
lock washers (10), and screws (11).
03 - Then, attach the blade (12) to the pillar (2) fastening
it through the pin (13), locking it through the lock
washers (14) and screws (15).
04 - Finish by coupling the hydraulic cylinder rod (7) to
12
the blade (12), fastening it through the pin (16), lo-
cking it with the lock washer (17) and screws (18).