Baldan CRSG 32, Instruction Manual

Page: 21 / 50

Instruction Manual
19 - CRSG / CRI / CRI-R
MOUNTING OF THE HYDRAULIC SYSTEM AND THE ARTICULATING WHEEL
ASSEMBLY CRSG 32 - 48 / CRI 32 - 44 MODELS WITH DUAL WHEELS
17 - Couple the hubs item 2, figure 9, on the articulation shaft item 3, fix the
hubs on the upright item 1 with the screws. Place the support of the
articulation shaft item 4, on the shaft item 3 through the pins item 5
and lock with the screw. Place the plates item 6, from the axle support
item 4 to the upright item 1, through the pin item 7 locking with the
cotter pin item 8. Fix the axle item 9 on the axle support item 4, with
the screws item 10.
18 - Fix the wheels item 11 on the axle item 9 through the nuts item 12.
19 - Place the articulation pistons item 13, with the cylinder base fixed
on the upright using the pin item 14, and the rod fixed on the arti-
culation shaft with the pin item 15.
20 - Fix the oil distributor item 16, on the item item 1 post. Couple the
hoses item 17 from the piston to the distributor. Attach the hoses
item 18 to the distributor and secure them to the frame using the
clamp item 19, as shown in figure 9.
21 - Place the crossbar item 20 on the articulation axis item 3 through
the pin item 21.
9
20
18
19
6
15
8
13
14
16
17
1
10
11
2
3
21
5
4
12
Figure 9