Baldan CRSG 32, Instruction Manual

Page: 9 / 50

Instruction Manual
7 - CRSG / CRI / CRI-R
The incorrect handling of the tractor engine can result in serious or fatal accidents. Before using the read carefully the instructions in this ma-
nual. Be sure that the person responsible for the operation is instructed about the correct handling and safety and has read and understood the
instruction manual concerning this machine.
WARNING
01- When operating the implement do not allow people to stand close or on the implement.
02- During assembly or disassembly of the discs section use protective gloves.
03- When coupling or uncoupling the hydraulic hose relieve the hydraulic circuit pressure.
04- Check out periodically the hoses condition. Where there is oil emptying change it immediately because the oil works under high pressure and
may cause serious damage.
05- Do not use large or daggy clothes because they can get caught on the implement.
06- When you start the tractor engine, be correctly placed at the operator seat and be aware of the correct and safety handling of both tractor and
implement. Always place the gearshift crank at the neutral position, turn off the gear of the power command and place the hydraulic commands at
the neutral position.
07- Do not turn on the tractor in a closed place without appropriate ventilation because the fumes from the fuel are is bad for health.
08- While maneuvering the tractor to clamp the implement be sure that there is enough space and nobody is too close, maneuver always in slow
gear and be ready to brake in case of emergency.