!
CAUTION
It is strongly recommended that shielded
wiring be used for ALL impulse meter
connections. The use of unshielded
wiring could results in erroneous dispense
volumes. The Director batch register
and the totaling register will read the
correct amounts requested, but the
actual dispense volume will be less. This
condition is a result of the unshielded
wiring picking up stray signals from
adjoining electrical wires and/or electrical
equipment. If unshielded wiring is used,
the condition described above will not
be covered under Balcrank’s Product
Warranty.
Thoroughly read and understand this manual before
installing, operating or servicing this equipment.
OPERATION, INSTALLATION,
MAINTENANCE AND REPAIR GUIDE
SERVICE BULLETIN SB3101
Rev. B 6/16
®
Director Jr.
Model #3110-031
24V DC Output
Summary of Contents for Director Jr. 3110-031
Page 17: ...16 NOTES...
