11
1300 663 907
After Sales Support
www.balcobrands.com
Model number:
AU200016
Motorcycle Bluetooth Kit
Operating with a Bluetooth enabled mobile
Pairing
1.
Place your Bluetooth enabled phone and the Bluetooth receiver near each
other (within 1 meter).
2.
Make sure the Motorcycle Bluetooth is turned off.
3.
In shutdown state, hold the Multifunction button down for 6 seconds until
you hear the voice prompt: ‘Pairing’ then release the button, the indicator
LED will flash red and blue.
4.
Activate Bluetooth on your mobile phone and search for the Bluetooth
receiver (Refer to your phones instruction if you are unclear on how to
search for a Bluetooth device).
5.
Choose the Bluetooth device named Balco Motorcycle Bluetooth and
choose to pair this device.
6.
The indicator LED will change to blue and you will hear a voice prompt
‘Connected’.
Phone calls
Answering incoming calls
1.
Press the multifunction button once to answer the incoming call you
will hear a voice prompt “Call answered”. (The call will be automatically
answered after 10 seconds if no action is taken)
2.
Use the jog wheel to increase or decrease the volume of the headset.
Ending phone calls
Press the multifunction button once to end the call you will hear a voice
prompt: ‘Call terminated’.
Rejecting phone calls
Hold down the multifunction button for 2 seconds, then release your hand
when you hear a voice prompt: ‘Call rejected’.
Operation
