42339 rev A1
03/06/20
2
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052,
6965815, 7030343, 7,417,834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All
material copyright of Balboa Water Group.
Main Menus
Main Screen
Press Menu/Select.
Main Screen
Light Cycle if enabled
Power-up Screens
Each time the System powers up, a series of numbers is displayed.
After the startup sequence of numbers, the system will enter Priming Mode (See Page 3).
Waiting a few seconds in the Main Menu
will allow the display to revert to the Main Screen.
Most changes are not saved unless Menu/Select is pressed.
Refer to key above.
If Time of Day is not set
“SET TIME” will
appear in this menu.
L O C K
L I T E
T I M E
T I M R
T E M P
M O D E
8 5 7
H O L D
U T I L
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
Menu/Select button
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
ignores any change to that menu item.
*****
Navigation
Navigating the entire menu structure is done with 2 or 3 buttons on the control panel.
Some panels have separate WARM (Up) and COOL (Down) buttons,
while others have a single Temperature button. In the navigation diagrams
Temperature buttons are indicated by a single button icon.
Panels that have two Temperature buttons (Warm and Cool) can use both
of them to simplify navigation and programming where a single Temperature
icon is shown.
The MENU/SELECT Button is used to choose the various menus and
navigate each section.
Typical use of the Temperature button(s) allows changing the Set
Temperature while the numbers are flashing in the LCD. The menus can be exited with certain button presses. Simply waiting for a few
seconds will return the panel operation to normal.
Indicates a Menu Item that
Depends on a Manufacturer
Configuration and
may or may not appear.
