Pump does
not work.
Motor termal overload
tripped.
Check for required ventilation and
cooling. If temperature is above the
pump’s maximum ambient, turn off
pump until it cools down.
No power at outlet.
Use another electrical appliance that
is known to work to check power
outlet.
Blown fuse / Circuit
breaker supplying the
power outlet.
Check and call electrician if
necessary.
Motor burnt out due to
voltage spike or flooded
by water.
The motor may need replacing.
Pump running
too slow.
Motor capacitor may be
damaged.
Check line voltage; if less that 90%
or more that 106% of rated voltage
consult a licensed electrician.
Water leaking
from between
the casing and
motor.
Casing bolts are not
tightened sufficiently;
worn mechanical seal
requires replacing.
Switch off the power to the pump.
Tighten the casing bolts or replace
the mechanical seal as required.
TROUBLE SHOOTING GUIDE (Continued)
SAVE THESE INSTRUCTIONS
FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN
PERSONAL INJURY, DEATH OR PROPERTY DAMAGE
