40985_G
12-06-13
13
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Additional Settings
Hold Mode - M037*
Hold Mode is used to disable the pumps during service functions like cleaning or replacing the filter. Hold Mode will last
for 1 hour unless the mode is exited manually. If spa service will require more than an hour, it may be best to simply shut
down power to the spa.
Drain Mode
Some spas have a special feature that allows Pump 1 to be employed when draining the water.
When available, this feature is a component of Hold Mode.
Utilities
The Utilities Menu contains the following:
A/B Temps
When this is set to On, the temperature display will alternate to display temperature from Sensor A and Sensor B in
the heater.
Demo Mode
Demo Mode is not always enabled, so it may not appear. This is designed to operate several devices in a sequence in
order to demonstrate the various features of a particular hot tub.
Fault Log
The Fault Log is a record of the last 24 faults that can be
reviewed by a service tech.
GFCI Test
(Feature not available on CE rated systems.)
GFCI Test is not always enabled, so it may not appear. This screen
allows the GFCI to be tested manually from the panel and can be
used to reset the automatic test feature. If the GFCI Test Feature
is reset, the device will trip within 7 days. (See Page 16)
Fault Log
Back
Entry 2
Message Code M026
1 Days Ago 2:21PM
Rest Mode
High Range
Set Temp 104°F
Sensors: A: 100 B: 96
Message:
Sensors are out of sync
*M036 is a Message Code. Codes like this will be seen in the Fault Log
