background image

Five Year Limited Warranty

  

Terms and Conditions 

 

1.  Limited Warranty 

Upon receipt of the attached warranty registration form, Balanced Audio Technology warrants 

the purchased product to be free from manufacturing, materials, and workmanship defects for 

five  years from date of original purchase, excepting vacuum tubes, subject to the following 

conditions.    Failure  to  return  the  enclosed  registration  form  within  30  days  from 

original  purchase  will  result  in  a  warranty  period  of  one  year  from  the  date  of 

manufacture. 

 

2.  Vacuum Tubes 

Vacuum tubes (including replacements under warranty) are warranted for one year from the 

date of the original VK-P6 purchase. 

 

3.  Limited to Original Purchaser 

This warranty is for the sole benefit of the original purchaser of the covered product, and may 

not be transferred to a subsequent purchaser of the product. 

 

4.  Conditions and Limitations 

This warranty is subject to certain conditions and limitations, as follows.  This warranty is void 

and inapplicable if the product has not been used in accordance with the instructions found 

elsewhere  in  this  manual,  or  if  it  has  been  misused  or  abused,  damaged  by  accident  or 

neglect, or in transport once in possession of the purchaser.  The warranty is also void if the 

product has been repaired, modified, or tampered with by anyone other than Balanced Audio 

Technology or its specifically authorized agents.   

 

5.  Remedy 

If  this  product  contains  a  materials,  manufacturing,  or  workmanship  defect  that  cannot  be 

repaired  at  the  dealership  where  the  product  was  purchased,  it  must  be  packed  in  original 

packaging  and  returned  to  Balanced  Audio  Technology  via  insured  freight,  at  the  owners 

expense.  If replacement packaging materials are required, they will be supplied by the factory 

at  a  nominal  charge.    Returned  products  must  be  accompanied  by  a  written 

description of the defect, and a return authorization number (available from the 

factory via phone or fax).  Upon receipt of defective product, Balanced Audio Technology 

agrees  to  repair  the  product  without  charge  for  parts  (except  vacuum  tubes  if  the  unit  is 

more  than  one  year  old),  or  labor.    The  product  will  then  be  returned  via  prepaid,  insured 

freight, with carrier at the sole determination of Balanced Audio Technology. This constitutes 

the purchasers sole remedy.   

 

6.  Design Changes 

Balanced Audio Technology reserves the right to modify its products or change specifications 

at any time without obligation or liability to previous purchasers. 

 

7.  Miscellaneous 

Any implied warranties relating to the above product shall be limited to the duration 

of this warranty.  This warranty does not extend to any incidental or consequential 

costs or damages to the purchaser. This warranty gives you specific legal rights.  You 

may also have other rights which vary from state to state. 

Summary of Contents for VK-P6














Reviews: