Connecting the VK-P6 to Your System
Cartridge Input
The back panel of the VK-P6 phono stage is equipped with one set of RCA
cartridge input connectors.
Output Connection
The VK-P6 is equipped with XLR output connectors. Any high quality set of
balanced interconnects can be used to connect the VK-P6 to your balanced
preamplifier.
Single-ended preamplifiers can be connected to the VK-P6 output through
the use of XLR-to-RCA adapters, available from BAT.
Description of Controls
Power Switch
The power switch toggles between two positions: OFF and ON. Turning the
unit OFF (even for a short period of time) will reset the soft start and mute
circuits. The VK-P6 will then require about 45 seconds to return back to
normal operation.
When you turn the unit ON, the VK-P6 will automatically go through a gentle
power-on sequence. At the end of this sequence the unit will automatically
unmute. However, since the source volume may be unknown at this time, it is
advisable to turn the volume control on your preamplifier fully
counterclockwise and place the mute switch in "Mute" position before
turning the VK-P6 ON.
Output Muting
