background image

4

Safety advice

Please read carefully through the following
information about safety and proper use.
Before reading, fold out the page with the 
illustrations and make yourself familiar with all
the functions of the shaver.
Be careful to keep these safety advice notes
and if necessary pass them on to a third party.

Warning! People with sensitive skin or 
allergies to cosmetics or similar conditions 
who suffer sudden skin irritations in 
reaction to shaving should first try the 
shaver on a small place on an arm or leg as 
a test.

To avoid injury, never use the shaver if it 
has a damaged foil or cutter.

Never allow the shaver to be immersed 
in water for long periods.

Never use shaving cream. It could cause 
the inner cutter to stick.

Only use shaving foam or soap lather.

Clean the shaver under running water.

Do not use salty water, cleaning agents 
or hot water.

Do not dismantle the shaver body as this 
can lead to an ineffective watertight seal.

If the shaver does not work properly, have it 
examined at an authorised service centre.

Use the shaver only for the purposes 
described above.

Before using for the first time

This wet/dry lady shaver can be used with 
shaving foam as a wet shaver or a dry shaver.
It is also intended for use in the shower. 
Tests have shown that better results are 
achieved with warm water and shaving foam.

Summary of Contents for KH 228









Reviews: