To stop the alarm , press anything button once ,the alarm beep will stop and the “
” icon become static ,alarm will
beep again same time next day.
Alarm Duration : 2 minutes.
Snooze Duration: 5 minutes
Reception Of The Radio Signal :
When you insert the batteries, all the icons on the LCD display will briefly up for 3 seconds, and you will hear a
beep tone.
The Receiver (clock ) will now start to make a connection to the wireless remote sensor, this operation takes
about 3 minutes and is displayed by flashing reception RF symbol “
“ on the LCD display .
After receiver has created a connection to the wireless remote sensor ( after 3 minutes ), it will then begin the
automatic reception of the DCF radio signal , this operation takes up to 7 minutes and is display by flashing radio
mast symbol
“
” on the LCD display.
If reception is successful, then the radio controlled icon ”
“ will appear continuously on the LCD display.
The Receive automatically must scan the DCF signal at 1:00 a.m.2:00 a.m.3:00 a.m .everyday, if it receiver DCF
signal at 3:00 a.m. it will stop receiving until 1:00 a.m. next day .but if it fail reception at 3:00 a.m,it will repeat again
at 4:00 a.m.5:00 a.m. This procedure is repeated automatically up to 5 times.
If this automatic process is unsuccessful, then use a sharp object to press the “ RESET (B6) “button on the
Receiver.
Remarks :
A flashing radio mast symbol indicates that the DCF signal reception has started.
A continuously displayed radio mast symbol indicates that the DCF was received successfully.
We recommend a minimum distance of 2.5 meters (8.2 Feet) to all sources of interference such as televisions or
computer monitors.
Radio reception is weaker in rooms with concrete walls (e.g. in cellars) and in offices. In extreme cases, place the
system at a window.
As there is less atmospheric interference at night, radio reception is normally possible at this time. A single
synchronization each day is sufficient to keep the time display accurate to one second.
Manual Receive Signal :
To start DCF reception manually, press ” WAVE (B1) ” button for 2 seconds, The radio controlled icon “
”
starts to
flash. if reception is successful the radio controlled icon ”
“
on the LCD display
.
If you want to stop DCF
reception , press and hold down “ WAVE (B1) ” for 2 seconds. If no signal is received within seven minutes, then
the DCF signal search stops ( the radio controlled icon “
”
disappears ) and starts again the next full hour .
DCF Signal Reception And Signal Indicator
Weak or no DCF signal ( only
icon flashing)
Receiving strong DCF signal (
icon flashing )
Successful Reception (
icon becomes static)
Failed Reception (
icon disappear)
Remark: when your clock is receiving radio controlled time signal ,all buttons except the snooze/light button do not
function.
Summary of Contents for 695159
Page 7: ......
