Balance 275947, User Manual

Page: 4 / 36

DESCRIPTION OF BUTTONS
The In-Out thermo mode-light clock has 6 major function buttons on the
front side and 1 major function buttons on the rear side.
1. [MANUAL-MOOD-ALERT] SLIDE SWITCH
This slide switch has three positions to slide: MANUAL, MOOD, and
ALERT.
- In MANUAL position, press the top of the main unit to turn on mood
light for 10 seconds. While mood light is on, every press on the key will
extend the light for another 10 seconds.
- In MOOD position, the mood light will light up permanently and change
its color continuously.
- In ALERT position, the alert light will light up permanently and change
its color according to measured ambient temperature on indoor or
channel #1 remote sensor.
Note: The mood & alert light will be only available when connecting
with the DC adaptor.
2. [MODE]
-
Toggle for Clock, Calendar or Alarm display mode.
Note: The main unit will auto exit to clock display mode if no key entry
for 10 seconds.
- Press & hold 2 seconds to activate the setting mode of Clock-Calendar
or Alarm time.
3. [▲]
- Press once to increase the setting in Clock/Calendar or Alarm time
setting mode.
- Press & hold 2 seconds to manually activate or deactivate the radio
controlled function permanently.
4. [▼]
- Press once to decrease the setting in Clock/Calendar or Alarm time
setting mode.
- Toggle Daily Alarm on/off while in Alarm display mode.
5. [CH]
-
Press shortly to toggle display of Indoor temperature, remote thermo
from Channel #1, Channel #2 and Channel #3 to Auto-scroll mode
which alternately display indoor temperature and the three remote
temperatures.
Note: when in the Auto-scroll mode, scrolling time for Indoor and each
channel is 4 seconds. Only registered channel(s) will be shown up in
~ 4 ~
(EN)