background image

15

LP Gas Cylinder Placement

Place the LP Gas Cylinder into the Base and secure with the 

GAS CYLINDER HOOK (28) by ensuring it int

erf

aces with the top 

rim of the LP Gas Cylinder. 

WARNING:

The pressure regulator and hose assembly supplied with the appliance must be used. 

Replacement pressure regulators and hose assemblies shall be those specified by the 

appliance manufacturer.

Storage of this appliance indoors is permissible only if the cylinder is disconnected and 

removed from the appliance.

Cylinders must be stored outdoors out of the reach of children and shall not be stored in a 

building, garage, or any other enclosed area.

Only use this appliance outdoors in a well ventilated area.

Never operate this appliance within 36in (0.9m) of any structure, combustible material or other 

gas cylinder.

Do not use this appliance under overhead combustable construction.

Do not place or use this appliance on a combustable surface.

This appliance becomes hot, do not place on any surface which cannot withstand high 

temperatures without deforming or being damaged.

This appliance is not to be installed in or on boats or recreational vehicles.

Failure to follow these instructions could result in fire, explosion or burn hazard which could 

cause property damage, personal injury or death.

Summary of Contents for Original Series

































Reviews: