Bakers Pride BPHHP-212i, Operation Manual

Page: 10 / 14

HEAVY DUTY HOT PLATE OPERATION MANUAL
8
CONVERSION
• Take a wide straight screwdriver and place it in
the two notches shown in picture regulator 7. Turn
clockwise to increase pressure and counter-clockwise
to reduce pressure. See picture regulator 7.
• Once the pressure has been adjusted replace the
brass cap.
Note the blue cap on the regulator. This is the
vent. There are openings below the top rim.
NEVER block these openings your regulator will
fail to operate correctly. On at least a monthly
basis blow off any dust or grease which may
accumulate around this cap. The openings must
remain open for the regulator to function. Clean
more often in a very greasy atmosphere.
NOTICE
EXPLODED VIEW & PARTS LIST
Exploded View - BPHHP-212i Shown for Clarity