39
Stand Assembly/Leg Extension Procedure
The cabinet is shipped with the legs bolted in the shipping position and has two work-surface height
settings per option:
30-1/8” and 38-5/8” (with the adjustable foot option)
30” and 36” (with the caster option)
Remove the following parts from the hardware box shipped with the unit. Check the quantities with the
list below.
Item No.
Description
Qty.
1
Adjustable Foot
or
Caster Option
4
2
3/8”-16 x 1” Hex head bolt
8
3
3/8” Lock washer
8
4
3/8” Flat washer
8
5
7/16” Plug button
8
OR
Slide the unit off the pallet
1.
To protect the floor finish, use a moving blanket. Carefully slide the unit off the pallet onto the
moving blanket.
2.
Slide the unit into its destination room before going further with the assembly/installation.
Installing the Adjustable Foot or Caster Option
3.
Lift one end of the cabinet/stand assembly up a minimum of 7” and block in position.
See
1
2
3
4
5
1
Summary of Contents for SterilGARD SG303
Page 34: ...APPENDIX...
Page 36: ...34 SG303 Ladder Schematic...
