Baker Blue Streak Portable or Stationary Band Sawmill - Rev 2, 03/07;
WWW.BAKER-ONLINE.COM
26
MAINTENANCE
General Clean Up
Note: Always follow proper Lockout / Tagout procedures prior to cleaning any part of the
machine.
On a daily basis use an air-hose to blow-off the dust and wood chips that accumulate in,
on and around the machine.
The machine operator or clean-up person is closer to dangerous operating mechanisms
of the machine during clean up than during production – extra care should be taken.
Do NOT clean with flammable or combustible materials.
Follow applicable codes and standards with regards to:
Ventilation and monitoring of work area for excessive accumulation of hazardous
vapors
Wearing personal protective equipment for handling materials
Using proper procedure for disposing of all waste materials
Important Notice:
Use extreme caution when
performing maintenance or making repairs
with the carriage head elevated.
A worn or damaged raise/lower drive belt may
result in the carriage head falling to the log
deck where a serious or fatal injury may occur.
Perform inspection and preventative maintenance per the
schedule and tasks noted on Page 27.
