Bugbox
UM-16 R5.0
Page 37 of 48
Bugbox User Manual
Replacing an Ezee Sleeve
To remove an Ezee Sleeve;
Ensure that the glove port covers are closed.
Remove the O-rings that hold the Ezee Sleeve to the glove port.
Note: The O-rings will be tight. Figure 26 shows the O-ring removal;
Figure 26: O-ring removal
Remove the Ezee Sleeve.
To install an Ezee Sleeve;
Place the new Ezee Sleeve onto the glove port, ensuring that the O-ring grooves are
completely covered and that the Ezee Sleeve is not kinked or overlapping.
Reinstall the O-rings over the Ezee Sleeve.
Note: The O-rings will be a tight fit. This is intentional, to provide a gas tight seal.
Note: The O-rings must completely cover the Ezee Sleeve to provide a gas tight seal.
